|
Product Details:
|
| Standard: | SCH.10, SCH.10S, SCH.20, SCH.30, SCH.40, SCH.40S, STD | Shape: | Equal |
|---|---|---|---|
| Diameter: | 3800 | General: | Semi Elliptical Head |
| Material: | SA516 | Surface: | Coating |
| High Light: | Pressure Vessel Hemispherical Tank Heads,Hemispherical Tank Heads ANSI |
||
HHA 2100mm 120mm Hemispherical Tank Heads ANSI Dish Ends For Pressure Vessel
PRODUCT DETELS
HHA 2100mm 120mm hemispherical tank heads with ANSI dish ends are designed for pressure vessel applications.
HHA: HHA refers to a specific type or code for hemispherical tank heads. It may represent a specific standard or specification used in the manufacturing and design of these tank heads. Without further information, it's difficult to provide specific details about HHA.
2100mm: The dimension of 2100mm represents the diameter of the tank head. This indicates that the tank head has a radius of 1050mm, resulting in a hemispherical shape.
120mm: The value of 120mm represents the thickness of the tank head. This thickness plays a crucial role in ensuring the structural integrity and pressure-bearing capacity of the tank head for the given diameter and material.
Hemispherical Tank Heads: Hemispherical tank heads are curved or domed end caps used to close and seal the ends of tanks or pressure vessels. Hemispherical heads offer excellent stress distribution characteristics and are commonly used in high-pressure applications.
ANSI Dish Ends: ANSI stands for the American National Standards Institute, which develops and publishes standards for various industries. ANSI dish ends refer to tank heads that conform to ANSI standards for dimensions, tolerances, and other specifications. These dish ends are designed to ensure compatibility and interchangeability with other ANSI-compliant components.
When utilizing HHA 2100mm 120mm hemispherical tank heads with ANSI dish ends for pressure vessels, it is crucial to consider factors such as material compatibility, pressure ratings, dimensional accuracy, and compliance with relevant codes and standards, including ANSI/ASME standards for pressure vessels. Consulting with engineers, pressure vessel specialists, or manufacturers experienced in tank head design and fabrication can help ensure the proper selection, design, and manufacturing of the tank heads for your specific pressure vessel requirements.
The scope of products
Applicable to various building decoration industries
Widely used in electric power, metallurgy, food, pharmaceutical, petrochemical, water treatment equipment and light industry equipment. The company can also undertake the processing of incoming drawings and samples according to customer requirements, and customize products of different specifications.
production workshop
equipment Exhibition
A corner of the warehouse
One-stop ordering of head products
Non-standard customization In stock for two days Customized for seven days
SPECIFICATIONS
| Brand Name: | HaiQun |
| Diameter: | 89mm--10000mm |
| Thickness: | 2mm--300mm |
| Reduction Ratio: | about 10% |
| Material: | Carbon Steel, Stainless Steel, Duplex, Super Duplex, Aluminum, Nickel and Nickel Alloys, Copper and Copper Alloys, Titanium and Its Alloys, Zirconium and all cladded material combinations. |
| Forming method: | Hot forming,cold forming |
| Surface Treatment: | Sand Blasting,Pickling,oil,discaling |
| Inspection: | UT,RT,MT,PT,TOFD. |
| Applicable Standard: | ASME ,PED and GB |
| Certificate: | ISO9001,ISO45001,OHSAS18001 |
| Applications: |
Such as oil, chemical industry, water conservancy, electric power, |
| Package: | Wooden cases ,wooden pallet,Steel pallet or as per customers requirement |
| Customized Product: | Available |
| Material | Carbon Steel; Stainless Steel; Special Steel |
| Size | 50-10000mm |
| Thickness | 2mm--300mm |
| Surface Treatment | 1. Intermediate & Final stage Heat Treatments; 2. Sand / Shot Blasting after Heat Treatment; 3. Weld Edge Preparation (Manual & Machined) |
| Reduction ratio | About 10% |
| Certificate | ISO9001 |
| Technology | 1. Cold & Hot forming; 2. Hot Pressed Hemispheres and Cold Formed Segmental Hemispheres; |
| Applicable standard | ANSI, ASME, MSS, API, DIN, JIS, BS. AWWA |
| Test | 1. Liquid Penetrant Examination; 2. Ultrasonic Testing; 3. 100% Radiography Testing of weld seams; 4. Magnet Particle Examination; 5. Inspection under various Third party Inspection Agencies 6. NDT( after forming): DPT, RT, MPI, UT; 7. NDT: 100% DPT, UT & RT OF weld joint |
| Connection | Welding |
| Application | Pressure vessel |
PRODUCTS
Product shipping packaging
FAQ
Q: Why choose us?
A: Our company has been in the header manufacturing business for more than thirty years. We have rich international experience and professionalism, and we can provide customers with a variety of high-quality header products.
Q:Can we provide OEM/ODM service?
A:Yes.Please feel free to contact us for further details.
Q:What are your terms of payment?
A:One is to telegraphic transfer 30% of the deposit before production the remaining 70% to the copy of the bill of lading;The other is an irrevocable 100% sight L/C
Q:Can we visit your factory?
A:A warm welcome.Once we have your itinerary we will arrange for a professional sales team to follow up your case.
Q:Can you provide samples?
A:Yes,the sample of general size is free of charge,but the buyer needs to pay the shipping fee.
Contact Person: Mr. Gao
Tel: +86 18015328118
Fax: 86-180-1532-8118
